RUFFO
19-ene-2010, 01:24
How to use dongle on private server ( USB to RJ45 )
First you need a captive works dongle.
Here is the one I used.
http://i48.tinypic.com/9bazk8.jpg
then you need to load the dongle bin that is here on the site for what model you have.
700 800 or ultima
Now you simply plug load your dongle bin... and plug your dongle in the usb and connect to a router with internet.
Scan you sats and leave auto roll ON and F1 000 patch on and F1 555 enable cardshare ecm
then simply hit INFO + 1 at the same time.
its sorta tricky. Then you will see this.
http://i47.tinypic.com/2q9gms7.jpg
You then simply put all your info in.
IP/URL
PORT
DSS KEY
USERNAME
PASSWORD
NOW VERY IMPORTANT where it says SERVER TYPE NewCS when its selected
HIT OK over it and you will see this.
http://i46.tinypic.com/iqzb5i.jpg
once you see this now you are doing very well.
put it on a channel like HBO and in a few seconds you have TV.
http://i47.tinypic.com/21kl56u.jpg
then you can do the server info
INFO + 0 = Server Status Display
http://i45.tinypic.com/1p9w80.jpg
and
INFO + 2 = youre IP STATUS
http://i49.tinypic.com/50ha8k.jpg
Then simply Enjoy TV.
no need to use a PC connected to your NULL and use RSSP.exe anymore
simply use the dongle.
i think its more easy this way.
Hope this helps.
not my tutorial but thought useful for users here =] you should be able to use any USB to RJ45 dongle from say ebay for this tutorial such as one below
First you need a captive works dongle.
Here is the one I used.
http://i48.tinypic.com/9bazk8.jpg
then you need to load the dongle bin that is here on the site for what model you have.
700 800 or ultima
Now you simply plug load your dongle bin... and plug your dongle in the usb and connect to a router with internet.
Scan you sats and leave auto roll ON and F1 000 patch on and F1 555 enable cardshare ecm
then simply hit INFO + 1 at the same time.
its sorta tricky. Then you will see this.
http://i47.tinypic.com/2q9gms7.jpg
You then simply put all your info in.
IP/URL
PORT
DSS KEY
USERNAME
PASSWORD
NOW VERY IMPORTANT where it says SERVER TYPE NewCS when its selected
HIT OK over it and you will see this.
http://i46.tinypic.com/iqzb5i.jpg
once you see this now you are doing very well.
put it on a channel like HBO and in a few seconds you have TV.
http://i47.tinypic.com/21kl56u.jpg
then you can do the server info
INFO + 0 = Server Status Display
http://i45.tinypic.com/1p9w80.jpg
and
INFO + 2 = youre IP STATUS
http://i49.tinypic.com/50ha8k.jpg
Then simply Enjoy TV.
no need to use a PC connected to your NULL and use RSSP.exe anymore
simply use the dongle.
i think its more easy this way.
Hope this helps.
not my tutorial but thought useful for users here =] you should be able to use any USB to RJ45 dongle from say ebay for this tutorial such as one below