RUFFO
23-abr-2010, 07:56
CW700/800_TE_Dongle_How to
--------------------------------------------------------------------------------
CW700/800_TE_Dongle_How to
For those who have problems installing the New Dongle file for Telefonica
My CW was already working with their old bin & tps...
Do a factory default!
1.- Conect the CW Dongle to yor CW USB Port
2.- Load the 253 bin in to your flash drive
3.- Then connect the USB stick in the dongle
4.- Then you have the dongle connected and the Flash Drive
5.- Turn ON Your CW From the back switch
6.- Then when the message USB Ready apears press USB-> OK -> and will give you the option of loading the bin via dongle (Press YES Option)
7.- Now START loading the bin/file via dongle
8.- When finished will ask a reboot and do it!!!
9.- Wait and you will see the lights turning on and wait (Up to one Minute)
NOTE:
-If you wont see a picture after one minute, Press F1 000 (Patch unabled)
Then youll be watching tv again!!!!!!!!!!
One more Thing:
-Do Not remove the Flash drive from Dongle!!!!
-Must leave the Flas drive on Dongle for the service to Work!
================================================== ========================================
Spanish XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
================================================== ========================================
Para aquellos que tienen problemas al instalar el nuevo archivo Dongle para Telefónica
Mi CW ya estaba trabajando con el antiguo File y Tp's ...
Hacer un Factory Default!!!
1 .- Conecta la Dongle a tu CW (Puerto USB)
2 .- Cargar la actualizacion 253 en su unidad Flash drive
3 .- A continuación, conecte el Flash drive al puerto USB Dongle
4 .- Ahora ya que esta todo conectado y la unidad flash drive instalada
5 .- Encienda el CW Desde el interruptor de la parte trasera
6 .- Ahora, cuando aparesca el mensage ( USB Ready) en tu pantalla presiona la opsion USB-> OK-> y le dará la opción de cargar la actualizacion través de dongle (Pulse Opción YES)
7 .- Ahora comenzará a cargar el bin/file a través de dongle
8 .- Cuando termine pedirá reiniciar el sistema y hacerlo!
9 .- Espere y verá las luces de encender y esperar (hasta un minuto)
NOTA:
-Si usted no ve una imagen después de un minuto, presione F1 000 (Patch Enabled)
Entonces ya estaras vindo viendo la tele otra vez !!!!!!!!!!
Una cosa más:
-No extraer la unidad Flas drive de Dongle!!
-Debe dejar el Flash drive en el Dongle para que el servicio funcione!
enjoy...
--------------------------------------------------------------------------------
CW700/800_TE_Dongle_How to
For those who have problems installing the New Dongle file for Telefonica
My CW was already working with their old bin & tps...
Do a factory default!
1.- Conect the CW Dongle to yor CW USB Port
2.- Load the 253 bin in to your flash drive
3.- Then connect the USB stick in the dongle
4.- Then you have the dongle connected and the Flash Drive
5.- Turn ON Your CW From the back switch
6.- Then when the message USB Ready apears press USB-> OK -> and will give you the option of loading the bin via dongle (Press YES Option)
7.- Now START loading the bin/file via dongle
8.- When finished will ask a reboot and do it!!!
9.- Wait and you will see the lights turning on and wait (Up to one Minute)
NOTE:
-If you wont see a picture after one minute, Press F1 000 (Patch unabled)
Then youll be watching tv again!!!!!!!!!!
One more Thing:
-Do Not remove the Flash drive from Dongle!!!!
-Must leave the Flas drive on Dongle for the service to Work!
================================================== ========================================
Spanish XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
================================================== ========================================
Para aquellos que tienen problemas al instalar el nuevo archivo Dongle para Telefónica
Mi CW ya estaba trabajando con el antiguo File y Tp's ...
Hacer un Factory Default!!!
1 .- Conecta la Dongle a tu CW (Puerto USB)
2 .- Cargar la actualizacion 253 en su unidad Flash drive
3 .- A continuación, conecte el Flash drive al puerto USB Dongle
4 .- Ahora ya que esta todo conectado y la unidad flash drive instalada
5 .- Encienda el CW Desde el interruptor de la parte trasera
6 .- Ahora, cuando aparesca el mensage ( USB Ready) en tu pantalla presiona la opsion USB-> OK-> y le dará la opción de cargar la actualizacion través de dongle (Pulse Opción YES)
7 .- Ahora comenzará a cargar el bin/file a través de dongle
8 .- Cuando termine pedirá reiniciar el sistema y hacerlo!
9 .- Espere y verá las luces de encender y esperar (hasta un minuto)
NOTA:
-Si usted no ve una imagen después de un minuto, presione F1 000 (Patch Enabled)
Entonces ya estaras vindo viendo la tele otra vez !!!!!!!!!!
Una cosa más:
-No extraer la unidad Flas drive de Dongle!!
-Debe dejar el Flash drive en el Dongle para que el servicio funcione!
enjoy...